Order Products : sales@su-jiao.com

Ketjenflex® 4

Category:	Plasticizer , Plasticizer Additive
Manufacturer:	Axcentive SARL
Trademark:	Ketjenflex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P4uqFa_Ketjenflex-4.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KETJENFLEX® 4 is a benzene sulfonamide based plasticizer used in Polyamide (co)polymers. Description and Application KETJENFLEX® 4 is used as a plasticizer in various polyamide plastic formulations. At dosage levels from 8 to 15% KETJENFLEX® 4 readily plasticizes: Polyamide 6 Polyamide 6,6 Polyamide 11 Polyamide 12 Copolymers of polyamide with either polyether, polyurethane and polyester With its high boiling point of 314°C KETJENFLEX® 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Articles produced of Polyamide/KETJENFLEX® 4 mixtures show good gas barrier properties and low liquid impregnation. KETJENFLEX® 4 will show a minimum of extrudation during lifetime of the manufactured part. Applications include: Air Brake tubing Hydraulic tubing Vacuum tubing Lubrication hoses A/C hoses Filaments

Message

KETJENFLEX® 4 is a benzene sulfonamide based plasticizer used in Polyamide (co)polymers.

Description and Application
KETJENFLEX® 4 is used as a plasticizer in various polyamide plastic formulations. At dosage levels from 8 to 15% KETJENFLEX® 4 readily plasticizes:

Polyamide 6

Polyamide 6,6

Polyamide 11

Polyamide 12

Copolymers of polyamide with either polyether, polyurethane and polyester

With its high boiling point of 314°C KETJENFLEX® 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses.

Articles produced of Polyamide/KETJENFLEX® 4 mixtures show good gas barrier properties and low liquid impregnation. KETJENFLEX® 4 will show a minimum of extrudation during lifetime of the manufactured part. Applications include:

Air Brake tubing

Hydraulic tubing

Vacuum tubing

Lubrication hoses

A/C hoses

Filaments

General Information

Additives Physical	Nominal Value	Unit
Density	1.15	g/cm³
Additive Concentration	> 99	%
State at Room Temperature	Liquid
Boiling Temperature	314	°C
Chemical Description	Benzene Sulfonamide

Resin Grade	Manufacturer	Category	Trademark
XANTAR® 17 UR	Mitsubishi Engineering-Plastics Corp	PC	XANTAR®
4LEX® 10F13300	4Plas	PC	4LEX®
Gallonprene® GP420-7007	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Lupoy® GN1008RF	LG Chem Ltd.	PC	Lupoy®
LNP™ VERTON™ MV00AS compound	SABIC Innovative Plastics	PP, Unspecified	LNP™ VERTON™