TECHNYL® B 218 V20 BLACK 21N Datasheet,Nylon 66/6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® B 218 V20 Black 21N is a polyamide 66/6, reinforced with 20% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between impact resistance, rigidity, thermal resistance and surface appearance.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 20% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Good liquidity Good demoulding performance Excellent appearance
Uses	Handle Accessories Application in Automobile Field
Agency Ratings	EC 1907/2006 (REACH) UL QMFZ2
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA66/6-GF20

Physical	Dry	Conditioned	Unit	Test Method
Density	1.28	--	g/cm³	ISO 1183/A
Water Absorption				ISO 62
23°C, 24 hr	1.2	--	%	ISO 62
Equilibrium, 23°C, 50% RH	2.7	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	7500	5000	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	140	85.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	3.0	9.0	%	ISO 527-2
Flexural Modulus (23°C)	6000	3500	MPa	ISO 178
Flexural Stress (23°C)	230	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	7.0	9.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	45	83	kJ/m²	ISO 179/1eU
Notched Izod Impact (23°C)	8.0	13	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	230	--	°C	ISO 75-2/Af
Melting Temperature	242	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	6.0E+15	1.0E+14	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+14	ohms·cm	IEC 60093
Dielectric Strength (2.00 mm)	32	28	kV/mm	IEC 60243-1
Dissipation Factor	0.010	0.11		IEC 60250
Comparative Tracking Index (Solution A)	450	350	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Oxygen Index	23	--	%	ISO 4589-2

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	255 - 265	°C
Middle Temperature	260 - 270	°C
Front Temperature	270 - 280	°C
Mold Temperature	70 - 100	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 66/6 , Polyamide 66/6 Copolymer
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P1nB2x_TECHNYLB218V20BLACK21N.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 282 TFE 10	RTP Company	Nylon 66	RTP
MTEGRITY™ LLDPE LL108AA	M. Holland Company	LLDPE	MTEGRITY™ LLDPE
Amilan® CM1061	Toray Resin Company	Nylon 6	Amilan®
KYOCERA TCG1180K2	KYOCERA Chemical Corporation	TS, Unspecified	KYOCERA
Plaslube® PEEK CF10 GL10 TL10 A HF	Techmer Engineered Solutions	PEEK	Plaslube®