Aquivion® PW87S

Category:	PFSA , Perfluorosulfonic Acid
Manufacturer:	Solvay Specialty Polymers
Trademark:	Aquivion®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	P0wzBC_Aquivion-PW87S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Aquivion® PW87S is a coarse, acid powder based on the short-side-chain (SSC) copolymer of Tetrafluoroethylene and the Sulfonyl Fluoride Vinyl Ether (SFVE) CF2=CF-O-(CF2)2-SO2F produced by Solvay. The resulting perfluoropolymer's functional groups are in their sulfonic acid form, SO3H. Aquivion® PW87S is chemically-stabilized (denoted by the S-suffix). Aquivion® PW87S exhibits ionic exchange capacity and it can be used as is under conditions where conventional exchange resins have shown insufficient chemical resistance. Due to its superacid functionality with many active groups, it can be used either directly or as an ingredient of composite structures active as a heterogeneous catalyst. This encompasses a wide range of organic syntheses and respective reaction mechanisms. PW87S is a good trade-off between polymer crystallinity and ionic exchange capacity. It is insoluble in water, acid or bases and in most solvents unless extreme conditions would be applied. Furthermore, Aquivion® PW87S can be dissolved in some organic solvents to produce ion exchage capacity membrane. Proper organic solvents are dipolar aprotic such as N-ethyl-2-pyrrolidone (NEP) and dimethyl sulfoxide. To facilitate the dissolution slightly increase the temperature to 50-60°C.

Message

Aquivion® PW87S is a coarse, acid powder based on the short-side-chain (SSC) copolymer of Tetrafluoroethylene and the Sulfonyl Fluoride Vinyl Ether (SFVE) CF2=CF-O-(CF2)2-SO2F produced by Solvay. The resulting perfluoropolymer's functional groups are in their sulfonic acid form, SO3H. Aquivion® PW87S is chemically-stabilized (denoted by the S-suffix).

Aquivion® PW87S exhibits ionic exchange capacity and it can be used as is under conditions where conventional exchange resins have shown insufficient chemical resistance.

Due to its superacid functionality with many active groups, it can be used either directly or as an ingredient of composite structures active as a heterogeneous catalyst. This encompasses a wide range of organic syntheses and respective reaction mechanisms.

PW87S is a good trade-off between polymer crystallinity and ionic exchange capacity. It is insoluble in water, acid or bases and in most solvents unless extreme conditions would be applied.

Furthermore, Aquivion® PW87S can be dissolved in some organic solvents to produce ion exchage capacity membrane. Proper organic solvents are dipolar aprotic such as N-ethyl-2-pyrrolidone (NEP) and dimethyl sulfoxide. To facilitate the dissolution slightly increase the temperature to 50-60°C.

General Information
Appearance	White
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Equivalent (EW) ¹	840 - 900	g/eq	Internal method
Moisture Content	5.0	wt%
Total acid content	1.11 - 1.19	meq/g	Internal method

Additional Information
HEALTH, SAFETY AND ENVIRONMENT Aquivion® powders are not harmful if used and handled according to standard processing procedures (see for example ‘the Guide to the Safe Handling of Fluoropolymer Resins' issued by the Society of the Plastics Industry). If handled inappropriately, membranes may release harmful toxic chemicals. Please refer to corresponding Material Safety Data Sheets for more information on handling and safety.PACKAGING, SHIPMENT AND STORAGE Aquivion® powders are delivered in standard polypropylene bottles and drums. Products should be kept closed in their original packaging.

Additional Information

HEALTH, SAFETY AND ENVIRONMENT Aquivion® powders are not harmful if used and handled according to standard processing procedures (see for example ‘the Guide to the Safe Handling of Fluoropolymer Resins' issued by the Society of the Plastics Industry). If handled inappropriately, membranes may release harmful toxic chemicals. Please refer to corresponding Material Safety Data Sheets for more information on handling and safety.PACKAGING, SHIPMENT AND STORAGE Aquivion® powders are delivered in standard polypropylene bottles and drums. Products should be kept closed in their original packaging.

Note Message
1 .	eq = mol SO3H

Resin Grade	Manufacturer	Category	Trademark
RTP 2800 B-55A UV	RTP Company	TPV	RTP
FARBOSET® 1190	Cosmic Plastics, Inc.	Epoxy	FARBOSET®
Geon™ Vinyl Flexible B6DB1	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
Plyophen 43703	Durez Corporation	Phenolic	Plyophen
Polifil® PP RMT-30	The Plastics Group	PP Impact Copolymer	Polifil® PP