Flexiblend® PP-1200

Category: PP+EPDM , Polypropylene + EPDM Rubber
Manufacturer: Colour Image Plastic Compound Sdn. Bhd. (CIPC)
Trademark: Flexiblend®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: P0cnTv_Flexiblend-PP-1200.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Flexiblend® PP-1200 is a thermoplastic rubber modified polypropylene compound. This grade offers impact strength and thermal properties.
General Information
Features
  • Good Thermal Stability
  • High Impact Resistance
  • Low Flow
Uses
  • Automotive Bumper
  • Automotive Exterior Trim
  • Automotive Instrument Panel
  • Automotive Interior Trim
Forms
  • Pellets
Processing Method
  • Injection Molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.900g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)1.3g/10 minASTM D1238
Molding Shrinkage - Flow (3.20 mm)1.0 to 1.4%ASTM D955
MechanicalNominal ValueUnitTest Method
Tensile Strength 22.0MPaASTM D638
Tensile Elongation (Break)450%ASTM D638
Flexural Modulus 640MPaASTM D790
Flexural Strength 24.0MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (23°C)630J/mASTM D256
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, 4.00 mm)101°CASTM D648
FlammabilityNominal ValueTest Method
Flame Rating (1.60 mm)HBUL 94
InjectionNominal ValueUnit
Drying Temperature 60.0 to 80.0°C
Drying Time 2.0 to 4.0hr
Rear Temperature 190 to 200°C
Middle Temperature 195 to 210°C
Front Temperature 215 to 220°C
Nozzle Temperature 210 to 220°C
Mold Temperature 30.0 to 60.0°C
Resin Grade Manufacturer Category Trademark
PRE-ELEC® PP 1397 Premix Oy TPO PRE-ELEC®
UBESTA P3014 U UBE Engineering Plastics, S.A. Nylon 12 UBESTA
GAPEKK™ 3300G Gharda Chemicals Ltd. PEKK GAPEKK™
Pibiflex® 4482 NATURALE SO.F.TER. SPA TPC-ET Pibiflex®
LEXAN™ 101 resin SABIC Innovative Plastics PC LEXAN™