Order Products : sales@su-jiao.com

Biograde B-M

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	Biograde Group of Companies
Trademark:	Biograde
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Oxcy9x_Biograde-B-M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A fully biodegradable resin for rigid moulding applications

Greater than 98% biodegradability when tested to ISO14855

Can be used for injection moulding and profile extrusion

BIOGRADE B-M is a fully biodegradable plastic based on a blend of thermoplastic starch (TPS), aliphatic polyesters (AP) and natural plasticizers (glycerol and sorbitol). This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material. The resin does not contain polyolefins.

Applications

Biodegradable injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, plant markers, etc.

Extruded tubes and rods

Biodegradable stakes and pegs

Biodegradable tags

Extruded pipes

Injection moulded caps and closures

Compostable rigid products if wall thickness is kept below 1 mm.

General Information
Features	Biodegradable Good Toughness High Elongation High Strength Renewable Resource Content
Uses	Caps Closures Disposable Tableware Personal Care Piping Rods Toothbrush Handles Tubing
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.22	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (150°C/0.325 kg)	1.8	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)	19.5	MPa	ASTM D883
Tensile Elongation (Break)	1.9	%	ASTM D883

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	24	J/m	ASTM D256
Unnotched Izod Impact	160	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	70.0 to 80.0	°C	ASTM D3418

Injection	Nominal Value	Unit
Suggested Max Moisture	0.20	%
Middle Temperature	150 to 160	°C
Front Temperature	130 to 140	°C
Nozzle Temperature	140 to 160	°C
Processing (Melt) Temp	160 to 165	°C
Mold Temperature	10.0 to 15.0	°C

Extrusion	Nominal Value	Unit
Suggested Max Moisture	0.20	%
Melt Temperature	160 to 165	°C

Resin Grade	Manufacturer	Category	Trademark
S&E Battery GPP1001V0M-HCO	S&E Specialty Polymers, LLC	TPO	S&E Battery
RheTech Polypropylene HP511-00	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
TEKNIFLEX® VDC 250-40	Tekni-Films, a div of Tekni-Plex	Film, PVC/PVDC	TEKNIFLEX®
HiFill® PA6/6 CM25 HS BK	Techmer Engineered Solutions	Nylon 66	HiFill®
LNP™ STAT-KON™ DD000 compound	SABIC Innovative Plastics	PC	LNP™ STAT-KON™