Order Products : sales@su-jiao.com
StarTUFF TF 55-HR-1
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | STAR Thermoplastic Alloys & Rubbers, Inc. |
| Trademark: | StarTUFF |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Or7G8D_StarTUFF-TF-55-HR-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
StarTUFF TF 55-HR-1 is an easy processing TPE designed for injection molding. Features -Soft Touch -Rubbery Feel -High Tear strength -High Tensile strength |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain, 23°C) | 1.53 | MPa | ASTM D412 |
| Tensile Strength (Yield, 23°C) | 7.45 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 750 | % | ASTM D412 |
| Tear Strength | 31.2 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (210°C, 11000 sec^-1) | 13.9 | Pa·s | ASTM D3835 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable GA-509OR | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| Sylvin 8343-70FUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Moplen HP648H | LyondellBasell Industries | PP Homopolymer | Moplen |
| Unilex™ UP.700.935UG | United Polychem | PE, Unspecified | Unilex™ |
| SABIC® LDPE PCG81 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
