Order Products : sales@su-jiao.com
Sinvicomp SIZ4801
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Opg5iG_Sinvicomp-SIZ4801.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp" SIZ 4801 is a wire & cable polyvinylchloride compound available in pellet form. SIZ 4801 provides good performance for insulation of electrical wires. |
| General Information | |
|---|---|
| Uses |
|
| Cable Type (BS 6746) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.49 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 91 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 17.0 | MPa | IEC 60811-1-1 |
| Tensile Elongation (Break) | 200 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 80°C, 168 hr 2 | IEC 811-1-2 | ||
| Tensile strength change | 10 | % | IEC 811-1-2 |
| Change in tensile elongation | 12 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability (200°C) | 1.5 | hr | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - 7 days, 80±2°C 3(80°C) | 1.20 | mg/cm² | IEC 811-3-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.0E+14 | ohms·cm | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Typical temperature profile for processing SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CCompression zone: 160°C~170°CMixing zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | @23°C |
| 2 . | 80±2°C |
| 3 . | 7 days, 80±2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sevrite™ 3600-60A | Vi-Chem Corporation | TPE | Sevrite™ |
| THERMOLAST® K TC3PAN (Series: AD/PA) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Nipol® 1562 | Zeon Corporation | Latex | Nipol® |
| 3M™ Dyneon™ Fluoroelastomer FPO 3630 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| Edgetek™ AT-15GB/000 BK023 | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
