Order Products : sales@su-jiao.com

Shin-Etsu Elastomer SV-15000U

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ol8RGQ_Shin-Etsu-Elastomer-SV-15000U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SV-15000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering. This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with filler. Typical Applications Roll covers. Diaphragms.

Message

SV-15000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.

This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with filler.

Typical Applications

Roll covers.

Diaphragms.

General Information
Features	Workability, good General
Uses	Diaphragm General
Processing Method	Extrusion Calendering Injection molding

Physical	Nominal Value	Unit
Specific Gravity	1.13	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	51

Elastomers	Nominal Value	Unit
Tensile Stress (100% Strain)	1.39	MPa
Tensile Strength	9.16	MPa
Tensile Elongation (Break)	440	%
Tear Strength ¹	15.4	kN/m
Compression Set (177°C, 22 hr)	9.0	%

Thermoset	Nominal Value	Unit
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit
Cure Agent	DBPH
Press / Post Cure: Press

Uncured Properties	Nominal Value	Unit
Curing Time	0.17	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
Rotec® ABS SE 3	ROMIRA GmbH	ABS	Rotec® ABS
THERMOLAST® K TC8MLZ (Series: AD1)	KRAIBURG TPE	TPE	THERMOLAST® K
Daplen™ EF210AEB	Borealis AG	TPO	Daplen™
DuraFlex 407-2	Evermore Chemical Industry Co., Ltd.	TPU-Polyether	DuraFlex
Ecomass® 4703ZC76	Ecomass Technologies	TPU, Unspecified	Ecomass®