IDI SMC S10 (Glass Content 25%)

Category: TS, Unspecified , Thermoset, Unspecified
Manufacturer: IDI Composites International
Trademark: IDI SMC
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: OhORcf_IDI-SMC-S10-Glass-Content-25-.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
PRODUCT SERIES: S10 SERIES SMC
PRODUCT DESCRIPTION: GENERAL PURPOSE GRADE

General purpose composite materials with a wide range of applications. Suitable applications are typically structural in nature with no flammability requirements.
General Information
Filler / Reinforcement
  • Glass Fiber, 25% Filler by Weight
Features
  • General Purpose
Uses
  • General Purpose
Forms
  • SMC - Sheet Molding Compound
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.75 to 1.90g/cm³ASTM D792
Molding Shrinkage - Flow 0.050 to 0.20%ASTM D955
Water Absorption (23°C, 24 hr)0.20 to 0.30%ASTM D570
HardnessNominal ValueUnitTest Method
Barcol Hardness 50 to 60ASTM D2583
MechanicalNominal ValueUnitTest Method
Tensile Modulus 15200MPaASTM D638
Tensile Strength 68.9MPaASTM D638
Flexural Modulus 15200MPaASTM D790
Flexural Strength 172MPaASTM D790
Compressive Strength 186MPaASTM D695
ImpactNominal ValueUnitTest Method
Notched Izod Impact 750J/mASTM D256
Unnotched Izod Impact 850J/mASTM D4812
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)> 204°CASTM D648
FlammabilityNominal ValueUnitTest Method
Burning Rate 17mm/minASTM D635
Resin Grade Manufacturer Category Trademark
Sindustris ABS LHF491U Sincerity Australia Pty Ltd. ABS Sindustris ABS
TAROBLEND 85 X0 Taro Plast S.p.A. PC+ABS TAROBLEND
LUBMER™ L4620 Mitsui Chemicals America, Inc. HMWPE LUBMER™
Plenco 02369 (Compression) Plastics Engineering Co. Phenolic Plenco
3M™ Dyneon™ Fluoroelastomer FC 2177 3M Advanced Materials Division Fluorelastomer 3M™ Dyneon™ Fluoroelastomer