Order Products : sales@su-jiao.com

KUBE PIR 21820

Category:	HDPE , High Density Polyethylene
Manufacturer:	KUBE Electronics AG
Trademark:	KUBE PIR
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OgdrBe_KUBE-PIR-21820.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years 21820: for applications where the material is not exposed to light over long periods

Message

Transmissive Plastic Injection Molding Granulates

For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers

Features:

The best material for fresnel lenses

Specially suited for thin parts

High transmission in the 7 to 14 µm central passive infrared (PIR) band

Choice of colors and MFI

RoHS and TSCA conform

Excellent visible light absorption available for low false alarm rate / VDS conformity

Special colors available on request

According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years

21820: for applications where the material is not exposed to light over long periods

General Information
Features	Flame Retardant
Uses	Lenses Thin-walled Parts
RoHS Compliance	RoHS Compliant
Appearance	Colors Available White
Forms	Granules

Physical	Nominal Value	Unit	Test Method
Density	0.951 to 0.960	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	17	g/10 min	ISO 1133

Injection	Nominal Value	Unit
Drying Temperature	< 70.0	°C
Drying Time	2.0	hr
Hopper Temperature	50.0 to 70.0	°C
Rear Temperature	170 to 220	°C
Middle Temperature	200 to 220	°C
Front Temperature	210 to 220	°C
Nozzle Temperature	220 to 230	°C
Processing (Melt) Temp	130	°C

Resin Grade	Manufacturer	Category	Trademark
Geon™ Vinyl Rigid Extrusion L0248 Opaque	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
Karina IVORY PVC COMPOUND -E 90850-35/1-D-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
HiFill® PA12 GF30 L	Techmer Engineered Solutions	Nylon 12	HiFill®
Hifax TYC 852P E C12719	LyondellBasell Industries	PP Copolymer	Hifax
Crastin® ST830FRUV NC010	DuPont Performance Polymers	PBT	Crastin®