Order Products : sales@su-jiao.com
OnFlex™ S EH 70A-3S7004
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OfUUuQ_OnFlex-S-EH-70A-3S7004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-S EH thermoplastic elastomer polymer is mixed with hydrogenated styrene block copolymer. In addition to having OnFlex™The main characteristics of-S products, such as high hardness, good mechanical properties, good processability, good coloring properties, and a large operating temperature range, this series of polymers has excellent cost performance. OnFlex™-S EH polymer is filled with other substances, so it is opaque and has a relatively high density. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 2.40 | MPa | ISO 37 |
| 300% strain | 3.20 | MPa | ISO 37 |
| Tensile Stress (Break) | 5.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 550 | % | ISO 37 |
| Tear Strength | 26 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 29 | % | ISO 815 |
| 70°C, 22 hr | 50 | % | ISO 815 |
| 100°C, 22 hr | 78 | % | ISO 815 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging (100°C) | 1.2 | mg | DIN 75201B |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Odor rating | 2.40 | VDA 270 | |
| General Material Type | Styrene thermoplastic elastomers (TES) | ||
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime Tuff-X ST | Primex Plastics Corporation | Unspecified | Prime Tuff-X |
| Acrylloy F | Spartech Plastics | Acrylic, Unspecified | Acrylloy |
| Bayblend® FR3002 | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| Geon™ Vinyl Rigid Extrusion 87549 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| LEXAN™ 945AU resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
