Category: | PVC, Unspecified , Polyvinyl Chloride |
Manufacturer: | Karina Ind. e Com. de Plásticos Ltda |
Trademark: | Karina |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | OblKvc_Karina-IVORY-PVC-COMPOUND-809D35-1-C-IS.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
PVC COMPOUND CLASS 70C (PVC/F AND ST1) RECOMMENDED FOR INSULATION AND JACKETING OF ELECTRICAL FLEXIBLE WIRES AND CABLES. ALSO SUITABLE FOR JACKETING OF COAXIAL CABLES. |
General Information | |
---|---|
Uses |
|
Appearance |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity 1 | 1.35 to 1.41 | g/cm³ | ASTM D792 |
Color | OK | ME 12 | |
Color a | -1.94 to 1.06 | ME 12 | |
Color b | 4.89 to 7.89 | ME 12 | |
Color L | 87.9 to 90.9 | ME 12 |
Additional Information | Nominal Value | Unit | Test Method |
---|---|---|---|
Maximum Variation of Elongation | < 25 | % | IEC 60811-1-2 |
Maximum Variation of Tensile Strength | < 25 | % | IEC 60811-1-2 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A, 15 sec) | 78 to 82 | NBR 7456 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress | > 12.6 | MPa | IEC 60811-1-1 |
Tensile Strain (Yield) | > 150 | % | IEC 60811-1-1 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 2 | > 12.6 | MPa | IEC 60811-1-2 |
Tensile Elongation 3(Break) | > 150 | % | IEC 60811-1-2 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Volume Resistivity 4 | > 1.0E+13 | ohms·cm | NBR 5403 |
Note Message | |
---|---|
1 . | 24 hr |
2 . | Aged in Air for 168 hr at 100°C |
3 . | Aged in Air for 168 hr at 100°C |
4 . | 24 hr |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Shinko-Lac® ABS 3302 | Mitsubishi Rayon America Inc. | ABS | Shinko-Lac® |
TAFMER™ A-1070S | Mitsui Chemicals America, Inc. | PAO | TAFMER™ |
Unichem 7812 NAT. | Colorite Polymers | PVC, Flexible | Unichem |
Geon™ Vinyl Rigid Molding M5015 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
EL-Lene™ LD1902F | SCG Chemicals Co., Ltd. | LDPE | EL-Lene™ |