TOPAS® 5013S-04 Datasheet,COC,Topas Advanced Polymers, Inc.-SHANGHAI SUSHENG

TOPAS® 5013S-04

Category:	COC , Cyclic Olefin Copolymer
Manufacturer:	Topas Advanced Polymers, Inc.
Trademark:	TOPAS®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Oarods_TOPAS-5013S-04.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Product Description TOPAS 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures. Selected Applications Microfluidics Microplates and biochips Labware Optics Cuvettes Electronics Healthcare and food contact Leading Attributes Exceptional mold detail replication; machinable Heat and chemical resistant, clarity and purity Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity More UV transparent than most resins (see 8007X10) Low dielectric constant, thermoplastic Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013L-10 - lubricated version for greater processing versatility TOPAS 6013S-04 - general purpose version with standard flow TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS IT X1 - impact grade for applications requiring extra toughness

Message

Product Description
TOPAS 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures.

Selected Applications

Microfluidics

Microplates and biochips

Labware

Optics

Cuvettes

Electronics

Healthcare and food contact

Leading Attributes

Exceptional mold detail replication; machinable

Heat and chemical resistant, clarity and purity

Temperature resistance, clarity and purity

Clarity, low birefringence, low moisture sensitivity

More UV transparent than most resins (see 8007X10)

Low dielectric constant, thermoplastic

Broad regulatory compliance

Related Grades for Injection Molding, Healthcare, Optics and Diagnostics

TOPAS 5013L-10 - lubricated version for greater processing versatility

TOPAS 6013S-04 - general purpose version with standard flow

TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM

TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols

TOPAS IT X1 - impact grade for applications requiring extra toughness

General Information
Features	High purity Low extract Moisture proof Radiation disinfection Copolymer Ethylene oxide disinfection Machinable High liquidity Good chemical resistance Heat resistance, high Definition, high Compliance of Food Exposure amorphous
Uses	Electrical/Electronic Applications Non-specific food applications Optical applications Laboratory apparatus Medical/nursing supplies
Agency Ratings	DMF 12132 FDA FCN 405 ISO 10993 USP Class VI Europe 10/1/2011 12:00:00 AM
Appearance	Clear/transparent
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.02	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)	44	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)	48.0	cm³/10min	ISO 1133
Molding Shrinkage ¹	0.10 - 0.50	%	Internal method
Water Absorption (Saturation, 23°C)	0.010	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3200	MPa	ISO 527-2/1A/1
Tensile Stress (Yield)	46.0	MPa	ISO 527-2/1A/50
Tensile Strain (Yield)	1.7	%	ISO 527-2/1A/50

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	1.6	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	13	kJ/m²	ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	127	°C	ISO 75-2/B
Glass Transition Temperature	134	°C	ISO 11357-2
Vicat Softening Temperature	135	°C	ISO 306/B50

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+16	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
1 kHz	2.35		IEC 60250
10 kHz	2.35		IEC 60250
Comparative Tracking Index	> 600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.60 mm)	HB		UL 94

Optical	Nominal Value	Unit	Test Method
Refractive Index	1.530		ISO 489
Transmittance	91.0	%	ISO 13468-2

Injection	Nominal Value	Unit
Drying Temperature	100	°C
Drying Time	4.0 - 6.0	hr
Rear Temperature	230 - 260	°C
Middle Temperature	240 - 280	°C
Front Temperature	260 - 290	°C
Nozzle Temperature	240 - 300	°C
Processing (Melt) Temp	240 - 300	°C
Mold Temperature	95.0 - 125	°C
Injection Pressure	50.0 - 110	MPa
Injection Rate	Moderate-Fast
Holding Pressure	30.0 - 60.0	MPa
Back Pressure	< 15.2	MPa
Screw Speed	50 - 200	rpm

Injection instructions
Feed Temperature: <100°C (<212°F)Max. residence time: <15 min; short interruptions to cycle >10 minutes, reduce Tx = 170°C (338°F)Injection speed: 50 - 150 mm/sec (2.0 - 6.0 in/sec)Nozzle type: Free Flow

Note Message
1 .	Dependent on processing conditions and part design.

Resin Grade	Manufacturer	Category	Trademark
Wellamid® MR409 22H-GY1	Wellman Engineering Resins	Nylon 66	Wellamid®
Ad-Tech Polyester NO. 11 TYPE II	Ad-Tech Plastic Systems Corp.	Polyester, TS	Ad-Tech Polyester
Celanex® 4022	Celanese Corporation	PBT	Celanex®
Chemlon® 430GHU BK400	Teknor Apex Company (Chem Polymer)	Nylon 6	Chemlon®
K-vinyl KST-58	Technovinyl Polymers India Ltd.	PVC, Flexible	K-vinyl

Resin Grade

Manufacturer