Order Products : sales@su-jiao.com
DAI-EL™ G-9062
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OaDA1h_DAI-EL-G-9062.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-9062 is a low viscosity, peroxide curable terpolymer designed for injection molding. It provides excellent mold flow and easy removal of molded parts. Properly compounded and cured, DAI-EL G-9062 has excellent compression set, chemical and steam resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.83 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 23 | MU | |
| Fluorine Content | 71 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Low Temperature Brittleness | -8 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 68 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (100% Strain, 25°C) | 4.60 | MPa | |
| Tensile Strength (Yield, 25°C) | 20.6 | MPa | |
| Tensile Elongation (Break, 25°C) | 220 | % | |
| Compression Set 1(200°C, 70 hr) | 12 | % |
| Note Message | |
|---|---|
| 1 . | P-24 O-Ring |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ H4SG6 | Marplex Australia Pty. Ltd. | PP Homopolymer | PROTEQ™ |
| Ranger PBT PBT-201-G10 272 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| Garaflex™ G 7789-A4 | AlphaGary | TPE | Garaflex™ G |
| Edgetek™ ET6000-5008 NHFR BLACK VN-3901 | PolyOne Corporation | Nylon 6 | Edgetek™ |
| Rotuba CAP CP800 (18% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
