Order Products : sales@su-jiao.com
GLAMIDE® TY-592GHV
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Oa5cQN_GLAMIDE-TY-592GHV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GLAMIDE®TY-592GHV is a polyamide 6 (nylon 6) product, which contains a 55% glass fiber reinforced material. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.81 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.10 - 0.30 | -- | % | ASTM D955 |
| 3.00 mm | 0.30 - 0.60 | -- | % | ASTM D955 |
| Water Absorption | ASTM D570 | |||
| 24 hr | 0.10 | -- | % | ASTM D570 |
| Equilibrium, 65% RH | 0.80 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 295 | 280 | MPa | ASTM D638 |
| Yield, 23°C | 245 | 230 | MPa | ASTM D638 |
| Yield, 80°C | 170 | 90.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.8 | -- | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 19000 | 18000 | MPa | ASTM D790 |
| 23°C | 17500 | 17000 | MPa | ASTM D790 |
| 80°C | 15000 | 8100 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 400 | 380 | MPa | ASTM D790 |
| Yield, 23°C | 330 | 310 | MPa | ASTM D790 |
| Yield, 80°C | 230 | 125 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 140 | 140 | J/m | ASTM D256 |
| 23°C | 150 | 180 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 270 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 264 | -- | °C | ASTM D648 |
| CLTE - Flow | 1.6E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 26 | 25 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 4.30 | -- | ASTM D150 | |
| Dissipation Factor (1 kHz) | 0.010 | -- | ASTM D150 | |
| Arc Resistance | 25.0 | 25.0 | sec | ASTM D495 |
| Comparative Tracking Index | 350 | 350 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.750 mm) | V-0 | -- | UL 94 |
| Additional Information |
|---|
| 干燥 HDT 0.46MPa, ASTM D648: >270 °C |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 310 - 330 | °C | |
| Mold Temperature | 150 | °C | |
| Injection Pressure | 135 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP Semitron® ESd 410C | Quadrant Engineering Plastic Products | PEI | Quadrant EPP |
| ACCUCOMP™ ACE091L | ACLO Compounders Inc. | Acetal (POM) Copolymer | ACCUCOMP™ |
| Dynaflex™ G2780-0001 | PolyOne Corporation | TPE | Dynaflex™ |
| Generic PVC, Unspecified - Unspecified | Generic | PVC, Unspecified | Generic |
| Sylvin 8225-65FUV Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
