Order Products : sales@su-jiao.com
Moplen EP640S
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OZzu9y_Moplen-EP640S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen EP640S is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP640S is a block copolymer suitable for thin-walled packaging, parts of electrical appliances, housewares, etc. Moplen EP640S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 27.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 4.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1570 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, Injection Molded | 39 | J/m | |
| 23°C, Injection Molded | 78 | J/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 1361 | RTP Company | PPS | RTP |
| DENKA POVAL PC-5500 | Denka Company Limited | PVOH | DENKA POVAL |
| KPOL-LDPE LD K-0.30/921 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| Mafill® CR C 8042 | Ravago Group | PP Copolymer | Mafill® |
| Adstif HA600U | LyondellBasell Industries | PP Homopolymer | Adstif |
