Order Products : sales@su-jiao.com
Generic PP Alloy
| Category: | PP Alloy , Polypropylene Alloy |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OZfNB9_Generic-PP-Alloy.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Alloy This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 to 1.06 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 176 to 2260 | MPa | ASTM D790 |
| Coefficient of Friction | 0.25 to 0.40 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 1500 to 5200 | µm | |
| Secant Modulus | ASTM D882 | ||
| MD | 2490 to 3000 | MPa | |
| TD | 2090 to 3600 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 170 to 239 | MPa | |
| TD : Yield | 189 to 210 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 89 to 120 | % | |
| TD : Break | 80 to 130 | % | |
| Seal Strength | 0.16 | N/mm | ASTM F88 |
| Seal Initiation Temperature | 106 to 131 | °C | |
| Oxygen Permeability (23°C) | 0.15 to 41 | cm³·mm/m²/atm/24 hr | ASTM D3985 |
| Water Vapor Transmission Rate | 0.78 to 10 | g/m²/24 hr | ASTM F1249 |
| Blocking Load | 6.0 | g | ASTM D3354 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | 95 to 140 | ASTM D2457 | |
| Haze | 1.3 to 2.6 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CONTINUUM™ DMDC-1250 NT 7 | The Dow Chemical Company | HDPE | CONTINUUM™ |
| Flexalloy® 90-U656C-70 | Teknor Apex Company | PVC Elastomer | Flexalloy® |
| GTPO™ 8280 | S&E Specialty Polymers, LLC | TPO (POE) | GTPO™ |
| LNP™ STAT-KON™ MFD03 compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ STAT-KON™ |
| LUVOCOM® 1-8973/LGF | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
