Tecnoflon® P 757

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OX8LOz_Tecnoflon-P-757.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® P 757 is a medium viscosity, medium fluorine (67%), peroxide curable fluoroelastomer. Tecnoflon® P 757 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability, optimum compression set and good flexibility at low temperatures. Tecnoflon® P 757 can be cross-linked using organic peroxides in conjunction with a coagent. Some of the basic properties of TECNOFLON® P 757 are: Low post cure Superior mold flow Lack of mold fouling Excellent mold release Good chemical resistance Good stress relaxation Good metal bonding Good low temperature performance Tecnoflon® P 757 can be used for compression, injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 757 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

Message

TECNOFLON® P 757 is a medium viscosity, medium fluorine (67%), peroxide curable fluoroelastomer. Tecnoflon® P 757 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability, optimum compression set and good flexibility at low temperatures. Tecnoflon® P 757 can be cross-linked using organic peroxides in conjunction with a coagent.

Some of the basic properties of TECNOFLON® P 757 are:

Low post cure

Superior mold flow

Lack of mold fouling

Excellent mold release

Good chemical resistance

Good stress relaxation

Good metal bonding

Good low temperature performance

Tecnoflon® P 757 can be used for compression, injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance.
Tecnoflon® P 757 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

General Information
Features	Bondability Crosslinkable Good Chemical Resistance Good Flow Good Mold Release Good Processability Low Compression Set Low Temperature Flexibility Medium Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Low Temperature Applications Metal Bonding Profiles Seals Sheet Valves/Valve Parts
Appearance	Translucent
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	44	MU
Fluorine Content ²	67	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Fainplast PVC FK 70	Fainplast Compounds S.r.l	PVC, Unspecified	Fainplast PVC
ELASTICHEM™ 5511TX-02	Colorite Polymers	PVC, Flexible	ELASTICHEM™
Karina WHITE PVC COMPOUND -E 801-10/ 43-CR	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
CALIBRE™ 301-22	Sumika Styron Polycarbonate Limited	PC	CALIBRE™
OTECH PVC OW135 - Wire Insulation	OTECH Corporation	PVC, Unspecified	OTECH PVC