Order Products : sales@su-jiao.com

Arak HDPE BL3

Category:	HDPE , High Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OUxsFh_Arak-HDPE-BL3.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

BL3 is a high density polyethylene grade with broad molecular weight distribution, suitable for blow moulding applications.
Characteristics:

High rigidity.

Good flow ability.

Good impact strength.

Good stress cracking resistance.

Typical applications are:

Containers ranging from a few ml up to 10 litres.

Sheets for thermoforming.

* BL3 is suitable for food contact.

General Information
Features	Food Contact Acceptable Good Flow Good Impact Resistance High ESCR (Stress Crack Resist.) High Rigidity Wide Molecular Weight Distribution
Uses	Blow Molding Applications Containers Sheet
Processing Method	Blow Molding Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	0.954	g/cm³	DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	1.0	g/10 min	DIN 53735
Environmental Stress-Cracking Resistance ¹(70°C)	> 2.00	hr	Internal Method

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength	> 6.5	kJ/m²	DIN 53453

Optical	Nominal Value	Unit	Test Method
Yellowness Index	< 4.0	YI	DIN 6167

Note Message
1 .	plax, 0.5 bar

Resin Grade	Manufacturer	Category	Trademark
TAROMID A 280S	Taro Plast S.p.A.	Nylon 66	TAROMID A
EMAREX® 300 GF43	MRC Polymers, Inc.	Nylon 6	EMAREX®
HIFOR® LT74105	Westlake Chemical Corporation	LLDPE	HIFOR®
Hifax TRC 134P C11306	LyondellBasell Industries	PP Copolymer	Hifax
Sylvin 5132-75 Clear 8350	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin