Order Products : sales@su-jiao.com
Elastocon® CLR31FX
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OO4MUU_ElastoconCLR31FX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR31FX is a transparent functionalized thermoplastic elastomer that has been developed for applications that require resilience, high strength properties, a good surface finish, print ability, and universal bonding for overmold adhesion. Elastocon® CLR31FX is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR31FX can be overmolded onto polypropylene and various other plastic and metal substrates. Elastocon® CLR31FX is supplied as ready to use pellets in 40 lb. bag quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 31 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.630 | MPa | ASTM D412 |
| Tensile Strength | 6.40 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 620 | % | ASTM D412 |
| Tear Strength | 22.8 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 - 177 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 193 - 204 | °C | |
| Mold Temperature | 21 - 38 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® CLR31FX thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polystyrene Impact 8260 | TOTAL Refining & Chemicals | PS (HIPS) | TOTAL Polystyrene |
| Vyncolit® 51-01 CAFR | Vyncolit N.V. | DAP | Vyncolit® |
| CERTENE™ LLBF-118A | Muehlstein | LLDPE | CERTENE™ |
| Larpeek 10 K/40 HM | LATI S.p.A. | PEEK | Larpeek |
| K-Bin Rigid PVC KB-6210 | K-Bin, Inc. | PVC, Rigid | K-Bin Rigid PVC |
