Order Products : sales@su-jiao.com

PB 910E

Category:	Polyolefin, Unspecified , Polyolefin
Manufacturer:	Pooya Polymer Tehran
Trademark:	PB
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ONxTOY_PB-910E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Carbon Black MB Description PB 910E is a stabilized polyolefin based masterbatch contains FEF Carbon Black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for general usage specially in PE and PP injection molded parts, mono & multilayer PO film, sheet & etc whilst providing significant cost reduction potential. Due to the special formulation & fine carbon black used in PB 910E, it offers excellent dispersion, high opacity & good resistance to UV exposure. Application PB 910E is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 2 to 8%.

Message

Carbon Black MB

Description
PB 910E is a stabilized polyolefin based masterbatch contains FEF Carbon Black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for general usage specially in PE and PP injection molded parts, mono & multilayer PO film, sheet & etc whilst providing significant cost reduction potential.
Due to the special formulation & fine carbon black used in PB 910E, it offers excellent dispersion, high opacity & good resistance to UV exposure.

Application
PB 910E is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 2 to 8%.

General Information
Additive	Antioxidant Carbon Black
Features	Antioxidant Dispersible Good UV Resistance Medium Heat Resistance
Uses	Film General Purpose Masterbatch Sheet
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	> 20	g/10 min	ASTM D1238
Carbon Black Content	35	%	ASTM D4218
Moisture Content	2000	ppm	ASTM D644

Additional Information	Nominal Value	Unit	Test Method
Dispersion	OK		Internal Method
Pellet Size	30.0 to 40.0	pcs/cm³	Internal Method

Resin Grade	Manufacturer	Category	Trademark
Tenac™-C ZLV40	Asahi Kasei Chemicals Corporation	Acetal (POM) Copolymer	Tenac™-C
Vyncolit® X655	Vyncolit N.V.	Phenolic	Vyncolit®
Novamid® 2030A	DSM Engineering Plastics	Nylon 66/6	Novamid®
Infino GC-1017	SAMSUNG SDI CO., LTD.	PC+ABS	Infino
INNOPOL® PP CS 1-3120 DEL	Inno-Comp Ltd.	PP Homopolymer	INNOPOL® PP