Order Products : sales@su-jiao.com
Osterlene® LD-2-919
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ONrkc1_Osterlene-LD-2-919.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LD-2-919 is a series of homopolymer resins especially designed for industrial and consumer packaging, and liner and bag applications. LD-2-919 has an excellent balance of processability, toughness and drawdown. LD-2-919 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 12.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 1% Secant, MD | 183 | MPa | ASTM D882 |
| Tensile Strength - MD (Yield) | 22.1 | MPa | ASTM D882 |
| Tensile Elongation - MD (Yield) | 200 | % | ASTM D882 |
| Dart Drop Impact 1 | 110 | g | ASTM D1709 |
| Elmendorf Tear Strength - MD | 350 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| The value shown as Secant Modulus, ASTM D882, was tested in accordance with ASTM E111.Product LD-2-919: Slip(ppm) - 0, Antiblock(ppm) - 0Product LD-2-919-SA: Slip(ppm) - 500L, Antiblock(ppm) - 4500HProduct LD-2-919-SLAUL: Slip(ppm) - 500L, Antiblock(ppm) - 10000UHProduct LD-2-919-AH: Slip(ppm) - 0, Antiblock(ppm) - 4000H |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDM 510-UV | Marco Polo International, Inc. | HDPE | MARPOL® |
| DOW™ LDPE 690 HEALTH+™ | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Jampilen HP550J | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| Paracril® BJLT M50 | INSA | NBR | Paracril® |
| Hostacom HBG 479R BLACK | LyondellBasell Industries | PP Homopolymer | Hostacom |
