Order Products : sales@su-jiao.com
PRIMATOP HDPE 006964EG
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OLysVk_PRIMATOP-HDPE-006964EG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRIMATOP HDPE 006964EG is a High Density Polyethylene material. It is available in North America for pipe extrusion. Primary attribute of PRIMATOP HDPE 006964EG: Food Contact Acceptable. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.965 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.66 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 15.0 to 20.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 300 | % | ASTM D638 |
| Flexural Modulus | 1650 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unilex™ UP.4400.952 | United Polychem | HDPE | Unilex™ |
| ALTECH® PA66 B 3050/100 GB50 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Cellophane™ 335LMS | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| Dryflex® 602700S | ELASTO | SEBS | Dryflex® |
| GERMAMID 6.6 KF 20 | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
