Order Products : sales@su-jiao.com

Marlex® 4538A

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OLxiex_Marlex-4538A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® 4538A is a Low Density Polyethylene material. It is available in Latin America or North America for blow molding or extrusion.

Important attributes of Marlex® 4538A are:

Clarity

Food Contact Acceptable

Good Flexibility

Homopolymer

Impact Resistant

Typical applications include:

Additive/Masterbatch

Adhesives/Tapes

Bottles

Consumer Goods

Food Contact Applications

General Information
Features	Autoclavable Food Contact Acceptable Good Flexibility Good Impact Resistance Homopolymer Medium Clarity Medium Gloss
Uses	Adhesives Blending Bottles Pharmaceuticals Simulated Wood Parts Toys
Agency Ratings	ASTM D 4976-PE113 FDA 21 CFR 177.1520(c) 2.2
Forms	Pellets
Processing Method	Blow Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.925	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	17.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	600	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	340	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746A

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min

Resin Grade	Manufacturer	Category	Trademark
SHIN-A SE-80	SHIN-A T&C	Epoxy	SHIN-A
Tarnamid® T-27 GF 15AT	Grupa Azoty S.A.	Nylon 6	Tarnamid®
CompaMid® PA 6	DimeLika Plast GmbH	Nylon 6	CompaMid®
INVISION™ VX 5060UI	A. Schulman Inc.	TPV	INVISION™
Lupoy® GN2101F	LG Chem Ltd.	PC	Lupoy®