Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PFA 6510GV15WZ

Category:	PFA , Perfluoroalkoxy
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OLrVnz_3M-Dyneon-Fluoroplastic-PFA-6510GV15WZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
3M™ Dyneon™ Fluoroplastic PFA 6510GV15WZ is a fluorothermoplastic compound consisting of a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether and glass fibers. The material has exceptional heat resistance, excellent electrical properties and excellent chemical and weather resistance. It is used for injection molded parts with high wear resistance and form stability. Features Wide service temperature range Good resistance to solvents and chemicals Extremely high weathering resistance and UV stability Good electrical properties High limiting oxygen index: Does not support combustion Good non-stick characteristics Good low-friction properties Good form stability Extremely high wear resistance

Message

3M™ Dyneon™ Fluoroplastic PFA 6510GV15WZ is a fluorothermoplastic compound consisting of a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether and glass fibers. The material has exceptional heat resistance, excellent electrical properties and excellent chemical and weather resistance. It is used for injection molded parts with high wear resistance and form stability.

Features

Wide service temperature range

Good resistance to solvents and chemicals

Extremely high weathering resistance and UV stability

Good electrical properties

High limiting oxygen index: Does not support combustion

Good non-stick characteristics

Good low-friction properties

Good form stability

Extremely high wear resistance

General Information
Filler / Reinforcement	Glass Fiber
Features	Copolymer Good Chemical Resistance Good Electrical Properties Good UV Resistance Good Wear Resistance Good Weather Resistance High Heat Resistance Low Friction Non-Stick Solvent Resistant
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	2.20	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	10	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, 23°C)	17.0	MPa	ISO 527-1
Tensile Strain (Break, 23°C)	20	%	ISO 527-1

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	308	°C	ISO 12086

Injection	Nominal Value	Unit
Processing (Melt) Temp	250 to 400	°C

Resin Grade	Manufacturer	Category	Trademark
Terlux® BX13010	INEOS Styrolution Group GmbH	MABS	Terlux®
Boda BDT601P	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
KOPELEN JM-350UN	Lotte Chemical Corporation	PP Impact Copolymer	KOPELEN
INEOS LDPE 23L430B	INEOS Olefins & Polymers Europe	LDPE	INEOS LDPE
Isocor™ HW29TL	Shakespeare Monofilaments and Specialty Polymers	Nylon 610	Isocor™