Order Products : sales@su-jiao.com
Softflex® 6018
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OL2wHZ_Softflex-6018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex 6500 is suitable for overmolding polypropylene and polyethylene. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity (Natural) | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C, 3.18 mm, Injection Molded) | 1.3 - 1.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C, 3.18mm, injection molding) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C, 3.18 mm) | 4.83 | MPa | ASTM D412 |
| Tear Strength | 22.8 | kN/m | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Ultimate Elongation | 900 | % | ASTM D412 |
| Additional Information |
|---|
| Overmold Bonding To: PP, PE |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 50 | % | |
| Rear Temperature | 171 - 182 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 204 - 216 | °C | |
| Nozzle Temperature | 202 - 213 | °C | |
| Mold Temperature | 21.1 - 43.3 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.621 - 1.21 | MPa | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 1.5:1.0 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 411 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| VICTREX® PEEK 150UF10 | Victrex plc | PEEK | VICTREX® PEEK |
| Daelim Po1y® PH-870 | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
| HIVOREX 5000S | Lotte Chemical Corporation | HDPE | HIVOREX |
| LUCITE® 30B | Lucite International Inc. | Acrylic (PMMA) | LUCITE® |
