Order Products : sales@su-jiao.com
Filter-bond™ E-3568
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OI7ovW_Filter-bond-E-3568.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond E-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. FILTER-bond E-3568 is used in applications such as: ultrafiltration and filtration prepot and gasketing applications. FILTER-bond's ability to be easily trimmed or cut is a decided advantage. Flexible gasketing applications are ideally suited for Filter-bond E-3568. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.928 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.050 to 0.20 | % | ASTM D2566 |
| Weight - per cubic inch | 17 | g |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 4.0 to 6.0 | min | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 to 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | < 2760 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 0.862 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 2 | 1.75 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 88, Mix Ratio by Volume: 100 | ||
| Thermoset Mix Viscosity (25°C) | 950 | cP | ASTM D4878 |
| Demold Time | |||
| 21°C | 40 to 90 | min | |
| 68°C | 20 to 30 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PP FR2 NAT | RTP Company | PP, Unspecified | RTP |
| Badamid® LB70 GF20 FR HF | Bada AG | Nylon 6 | Badamid® |
| ICORENE® 3542 | ICO Polymers SA, A Division of A. Schulman | PE Copolymer | ICORENE® |
| Kanghui KH2100GL | Yingkou Kanghui Petrochemical Co., LTD. | PBT | Kanghui |
| Kepamid® 1310GSU | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
