Order Products : sales@su-jiao.com

Pinnacle PP 1635AF

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OFAg0n_Pinnacle-PP-1635AF.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635AF is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for injection molding; the flow properties should be of particular benefit in the production of thin-walled articles. It contains no nucleators, antistats or animal derivatives. Potential applications include: healthcare/medical packaging, labware, containers and thin-wall articles in general. The 1635AF highlights: Heat Sterilizable (autoclavable) Contains no animal derivatives Excellent color and processing stability Low Extractables Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Message

35 MELT FLOW HOMOPOLYMER

Pinnacle Polymers Polypropylene 1635AF is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for injection molding; the flow properties should be of particular benefit in the production of thin-walled articles. It contains no nucleators, antistats or animal derivatives.

Potential applications include: healthcare/medical packaging, labware, containers and thin-wall articles in general.

The 1635AF highlights:

Heat Sterilizable (autoclavable)

Contains no animal derivatives

Excellent color and processing stability

Low Extractables

Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

General Information
Features	Autoclavable Food Contact Acceptable Good Color Stability Good Processing Stability Heat Sterilizable Homopolymer Low Extractables No Animal Derived Components
Uses	Containers Labware Medical Packaging Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	34.5	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	10	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1550	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	27	J/m	ASTM D256

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I

Resin Grade	Manufacturer	Category	Trademark
RTP 225A HI	RTP Company	Nylon 6	RTP
TECHNO ABS 400	Techno Polymer Co, Ltd.	ABS	TECHNO ABS
NuSil R-2550	NuSil Technology	Silicone	NuSil
Andur 8 APLM	Anderson Development Company	PUR-Ester/TDI	Andur
ORIENTENE FM 03	Oriental Petrochemical Company	PP Homopolymer	ORIENTENE