Order Products : sales@su-jiao.com
3M™ Dyneon™ PTFE Compound TFX 4262
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE Compound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OB15yy_3M-Dyneon-PTFE-Compound-TFX-4262.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.08 | g/cm³ | ASTM D4745-06 |
| Apparent Density | 0.75 | g/cm³ | ASTM D4894-07 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D4894-07 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness 1(Shore D) | 67 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break) | 23.0 | MPa | ASTM D4745-06 |
| Tensile Elongation 3(Break) | 300 | % | ASTM D4745-06 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | 45.0 | MPa | |
| Compression Molding Temperature | 23 to 26 | °C | |
| Sintering Temperature | < 365 | °C |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| 3 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PC PC1800 resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
| Udel® P-1710 | Solvay Specialty Polymers | PSU | Udel® |
| Ecollent™ PPC | Lucent Polymers, Inc. | PP, Unspecified | Ecollent™ |
| KumhoSunny ASA XC220 | Shanghai KumhoSunny Plastics Co., Ltd. | ASA | KumhoSunny ASA |
| Plaskon MUF-2B | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
