| Category: | PP+EPDM , Thermoplastic Vulcanizate |
| Manufacturer: | ENPLAST, a Ravago Group Company |
| Trademark: | ENFLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OAuvYE_ENFLEXVU42080A.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| Economical, vulcanized EPDM/PP series |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 2781 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 3.30 | MPa | ISO 37 |
| 300% strain | 4.80 | MPa | ISO 37 |
| Tensile Stress (Break) | 9.50 | MPa | ISO 37 |
| Tensile Elongation (Break) | 610 | % | ISO 37 |
| Tear Strength | 55 | kN/m | ISO 34-1 |
| Compression Set | ASTM D395B | ||
| 70°C, 22 hr | 47 | % | ASTM D395B |
| 100°C, 22 hr | 61 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ISO 974 |
| Maximum Dynamic Service Temperature | 135 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E880 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| TAROPRENE® 1 A35 E1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| EnCom ABS 3535 | EnCom, Inc. | ABS | EnCom |
| IROGRAN® A 85 P 4380 | Huntsman Corporation | TPU-Polyether | IROGRAN® |
| ALTECH® PA6 + ASA A 4010/621 MR10 IM UV | ALBIS PLASTIC GmbH | ASA+Nylon | ALTECH® PA6 + ASA |