Order Products : sales@su-jiao.com
OP - PBT 15GF-FR
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - PBT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O6im53_OP---PBT-15GF-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OP-PBT 15GF-FR is a polybutene terephthalate (PBT) material, which contains a 15% glass fiber reinforced material. This product is available in North America and is processed by injection molding. The main features of OP-PBT 15GF-FR are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 14 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.90 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 89.6 | MPa | ASTM D638 |
| Flexural Modulus | 4930 | MPa | ASTM D790 |
| Flexural Strength | 138 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (4°C) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 204 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 174 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-0 | UL 94 | |
| 3.18 mm | V-0 | UL 94 |
| Additional Information |
|---|
| Melt Mass- Flow Rate (MFR), ASTM D1238, 210°C / 2.16 kg: 10 to 18 g/10 min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 116 - 121 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 238 - 254 | °C | |
| Middle Temperature | 243 - 260 | °C | |
| Front Temperature | 249 - 266 | °C | |
| Processing (Melt) Temp | 246 - 274 | °C | |
| Mold Temperature | 71.1 - 87.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime PE HMWPE 1000 Swirl | Primex Plastics Corporation | HMWPE | Prime PE |
| SEETEC LLDPE UR744 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| UNITIKA Nylon 6 A1022GFL60 (A) | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| POLYfill PP CIM9040 | Polykemi AB | PP, Unspecified | POLYfill |
| POLYfill PPC B10075 | Polykemi AB | PP Copolymer | POLYfill |
