Order Products : sales@su-jiao.com
Alkatuff® 401
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkatuff® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O6A01z_Alkatuff-401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
401 is a hexene copolymer linear low density polyethylene, designed for a variety of film applications. 401 is formulated with antiblock, stabilisation and a high level of slip additive. 401 is formulated with additional slip additive for manufacture at 25µm and below. It can be used in applications such as garbage bags and other light gauge applications. 401 is not recommended for use in outdoor applications (especially applications where there may be prolonged exposure to sunlight, eg. agricultural films) without the addition of appropriate Hindered Amine based Light Stabilisers (HALS). 401 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c), item 3.1. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 0.12 0.14 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 50 100 | µm | |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 50 µm | 230 | MPa | ASTM D882 |
| 2% secant, MD : 100 µm | 210 | MPa | ASTM D882 |
| 2% secant, TD : 50 µm | 240 | MPa | ASTM D882 |
| 2% secant, TD : 100 µm | 220 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 50 µm | 10.0 | MPa | ASTM D882 |
| MD : Yield, 100 µm | 10.0 | MPa | ASTM D882 |
| TD : Yield, 50 µm | 12.0 | MPa | ASTM D882 |
| TD : Yield, 100 µm | 12.0 | MPa | ASTM D882 |
| MD : Break, 50 µm | 32.0 | MPa | ASTM D882 |
| MD : Break, 100 µm | 30.0 | MPa | ASTM D882 |
| TD : Break, 50 µm | 32.0 | MPa | ASTM D882 |
| TD : Break, 100 µm | 23.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 50 µm | 1000 | % | ASTM D882 |
| MD : Break, 100 µm | 750 | % | ASTM D882 |
| TD : Break, 50 µm | 1000 | % | ASTM D882 |
| TD : Break, 100 µm | 800 | % | ASTM D882 |
| Dart Drop Impact | ASTM D1709 | ||
| 50 µm, blown film | 240 | g | ASTM D1709 |
| 100 µm, blown film | 140 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 50 µm | 630 | g | ASTM D1922 |
| MD : 100 µm | 290 | g | ASTM D1922 |
| TD : 50 µm | 1100 | g | ASTM D1922 |
| TD : 100 µm | 520 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | ASTM D2457 | ||
| 50.0 µm, blown film | 66 | ASTM D2457 | |
| 100 µm, blown film | 68 | ASTM D2457 | |
| Haze | ASTM D1003 | ||
| 50.0 µm, blown film | 12 | % | ASTM D1003 |
| 100 µm, blown film | 8.0 | % | ASTM D1003 |
| Additional Information |
|---|
| Film properties taken from blown film processed at a blow up ratio of 3.5:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PC 1007 GF 20 | TER HELL PLASTIC GMBH | PC | TEREZ PC |
| NuSil MED-2214 | NuSil Technology | Silicone | NuSil |
| Huafon HF-3065D | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| KEBAFORM® C 90 W | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| ULTEM™ AUT200 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
