Order Products : sales@su-jiao.com
CERTENE™ PBS-4AN
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O4OxdT_CERTENE-PBS-4AN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBS-4AN is a certified prime grade Impact copolymer specially designed for extrusion of sheet for thermoforming food packaging containers. PBS-4AN features Antistatic to protect against dust pick-up, and Nucleation for faster crystallization times. It combines good thermal stability and fast cycles with good Toughness and Stiffness, good melt processing stability, and very good Organoleptic properties. PBS-4AN other applications include injection molding of household goods, food storage containers, and hospital wares. PBS-4AN complies with FDA regulation 21CRF 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 30.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1380 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 102 | °C | ASTM D648 |
| Vicat Softening Temperature | 145 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Glastic® CBC-NBC | Glastic Corporation | Polyester, TS | Glastic® |
| Hapcoat™ 3727 | Hapco Inc. | TP, Unspecified | Hapcoat™ |
| Lasulf LASULF G/15 | LATI S.p.A. | PSU | Lasulf |
| Karina STRAW PVC COMPOUND 800-38/ 14-F-IS-BZ | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LNP™ THERMOCOMP™ DX05475 compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
