Order Products : sales@su-jiao.com

TangoPlus™ FLX930

Category:	Unspecified , Unspecified
Manufacturer:	Stratasys
Trademark:	TangoPlus™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	O2g5tG_TangoPlus-FLX930.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PolyJet rubber-like materials include TangoGray™, TangoBlack™, TangoPlus™ and TangoBlackPlus™. They offer various levels of elastomer characteristics: Shore scale A hardness, elongation at break, tear resistance and tensile strength that make it suitable for non-slip or soft surfaces on consumer electronics, medical devices and automotive interiors. Ideal for: Rubber surrounds and overmolding Soft-touch coatings and nonslip surfaces Knobs, grips, pulls, handles, gaskets, seals, hoses and footwear Exhibition and communication models

Message

PolyJet rubber-like materials include TangoGray™, TangoBlack™, TangoPlus™ and TangoBlackPlus™. They offer various levels of elastomer characteristics: Shore scale A hardness, elongation at break, tear resistance and tensile strength that make it suitable for non-slip or soft surfaces on consumer electronics, medical devices and automotive interiors.

Ideal for:

Rubber surrounds and overmolding

Soft-touch coatings and nonslip surfaces

Knobs, grips, pulls, handles, gaskets, seals, hoses and footwear

Exhibition and communication models

General Information
Features	High Elasticity Soft
Uses	Automotive Applications Coating Applications Consumer Applications Electrical/Electronic Applications Flexible Grips Footwear Gaskets Handles Hose Knobs Medical Devices Overmolding Prototyping Rubber Replacement Soft Touch Applications
Processing Method	3D Printing, Jetted Photopolymer

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.12 to 1.13	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	26 to 28		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	0.800 to 1.50	MPa	ASTM D412
Tensile Elongation (Break)	170 to 220	%	ASTM D412
Tear Strength	1.96 to 3.92	kN/m	ASTM D624
Compression Set	4.0 to 5.0	%	ASTM D395

Resin Grade	Manufacturer	Category	Trademark
SAXAMID™ 226U	SAX Polymers	Nylon 66	SAXAMID™
Ultramid® B3S	BASF Corporation	Nylon 6	Ultramid®
Adell Polyamide AR-37	Adell Plastics, Inc.	Nylon 66	Adell Polyamide
FHR Polypropylene 11R12A	Flint Hills Resources, LP	PP Homopolymer	FHR Polypropylene
INNOPOL® PP CS 3-9120 SR5	Inno-Comp Ltd.	PP, Unspecified	INNOPOL® PP