Order Products : sales@su-jiao.com
Ateva® 3325AC
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Celanese EVA Performance Polymers |
| Trademark: | Ateva® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O18LiO_Ateva-3325AC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is commonly used for hot melt adhesive applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 43 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 33.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 68 | ||
| Shore D | 16 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 9.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 900 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 7.00 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 60.0 | °C | ASTM D3418 |
| Ring and Ball Softening Point | 113 | °C | ASTM E28 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ProvaMed® TPE 1080 | ACTEGA GmbH | TPE | ProvaMed® TPE |
| Sylvin 916VO-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Andur 720 DP/Curene® 442 | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| Genestar™ G1300A-M41 | Kuraray Co., Ltd. | Nylon 9T | Genestar™ |
| DAI-EL™ G-801 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
