TECHNYL STAR® S 218 MT40 NATURAL Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL STAR® S 218 MT40 Natural is based on a patented high flow polyamide 6 resin (TechnylStar), reinforced with 40% mineral filler, heat stabilized, for injection moulding. This grade offers good mechanical properties and is characterized by a high fluidity of the melt.

General Information
Filler / Reinforcement	Mineral filler, 40% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Excellent appearance Low warpage
Uses	Handle Application in Automobile Field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA6-MD40

Physical	Dry	Conditioned	Unit	Test Method
Density	1.45	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	0.72	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	6000	2400	MPa	ISO 527-2/1A
Tensile Strength
Yield, 23°C	75.0	55.0	MPa	ASTM D638
Fracture, 23°C	7.00	22.0	MPa	ASTM D638
Fracture, 23°C	90.0	55.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	8.0	34	%	ISO 527-2
Flexural Modulus (23°C)	5500	1850	MPa	ISO 178
Flexural Stress (23°C)	150	65.0	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	5.0	9.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength
23°C	120	100	kJ/m²	ISO 179/1eU
23°C	150	330	kJ/m²	ISO 179/1fU
Notched Izod Impact (23°C)	5.0	8.0	kJ/m²	ISO 180
Unnotched Izod Impact (23°C)	100	245	kJ/m²	ASTM D256
Unnotched Izod Impact Strength (23°C)	100	200	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	186	--	°C	ISO 75-2/Bf
1.8 MPa, not annealed	90.0	--	°C	ISO 75-2/Af
Melting Temperature	221	--	°C	ISO 11357-3

Flammability	Dry	Conditioned	Test Method
Flame Rating			UL 94
0.8 mm	HB	--	UL 94
1.6 mm	HB	--	UL 94
3.2 mm	HB	--	UL 94

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	230 - 235	°C
Middle Temperature	235 - 245	°C
Front Temperature	245 - 250	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL STAR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NyIv2m_TECHNYLSTARS218MT40NATURAL.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 205 FR MS 5	RTP Company	Nylon 66	RTP
RTP 603 TFE 13 SI 2	RTP Company	ABS	RTP
Hanwha Total PP BJ550	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP Impact Copolymer	Hanwha Total PP
ACRYPET® VH5	Lucite International Holland BV	Acrylic (PMMA)	ACRYPET®
Sylvin 8820H NATURAL	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin