Order Products : sales@su-jiao.com
Vydyne® ECO366H NT0708
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ascend Performance Materials Operations LLC |
| Trademark: | Vydyne® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NyFsW9_VydyneECO366HNT0708.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vydyne ECO366H NT0708 is a non-halogenated, unfilled, flame-retardant PA66 homopolymer designed with superior flow properties to assist in filling thin-walled, intricate parts. It is stabilized to provide heat stability up to 170°C for 1,000 hours. ECO366H NT0708 is also lubricated for machine feed and easy mold release and has an Underwriters Laboratories UL 94 flammability classification of V-0 at 0.4mm (0.016") thick. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.17 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Lateral flow : 23°C, 2.00mm | 0.60 | -- | % | ISO 294-4 |
| Traffic : 23°C, 2.00mm | 0.90 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 0.80 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.3 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 83.0 | 58.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 4.0 | 5.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 3900 | 1350 | MPa | ISO 178 |
| Flexural Strength (23°C) | 107 | 39.0 | MPa | ISO 178 |
| Poisson's Ratio | 0.40 | -- | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 3.7 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 3.4 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 78 | -- | kJ/m² | ISO 179/1eU |
| 23°C | 75 | -- | kJ/m² | ISO 179/1eU |
| Notched Izod Impact (23°C) | 6.0 | -- | kJ/m² | ISO 180 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 240 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 75.0 | -- | °C | ISO 75-2/A |
| Melting Temperature | 265 | -- | °C | ISO 11357-3 |
| RTI Elec | UL 746 | |||
| 0.40 mm | 150 | -- | °C | UL 746 |
| 0.75 mm | 150 | -- | °C | UL 746 |
| 1.5 mm | 150 | -- | °C | UL 746 |
| 3.0 mm | 150 | -- | °C | UL 746 |
| RTI | UL 746 | |||
| 0.40 mm | 130 | -- | °C | UL 746 |
| 0.75 mm | 130 | -- | °C | UL 746 |
| 1.5 mm | 130 | -- | °C | UL 746 |
| 3.0 mm | 130 | -- | °C | UL 746 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity (0.750 mm) | 1.0E+19 | -- | ohms·cm | IEC 60093 |
| Dielectric Strength (1.00 mm) | 20 | -- | kV/mm | IEC 60243 |
| Arc Resistance (3.00 mm) | PLC 5 | -- | ASTM D495 | |
| Comparative Tracking Index (3.00 mm) | 600 | -- | V | IEC 60112 |
| High Amp Arc Ignition (HAI) | UL 746 | |||
| 0.40 mm | PLC 0 | -- | UL 746 | |
| 0.75 mm | PLC 0 | -- | UL 746 | |
| 1.5 mm | PLC 0 | -- | UL 746 | |
| 3.0 mm | PLC 0 | -- | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) | PLC 0 | -- | UL 746 | |
| Hot-wire Ignition (HWI) | UL 746 | |||
| 0.40 mm | PLC 4 | -- | UL 746 | |
| 0.75 mm | PLC 3 | -- | UL 746 | |
| 1.5 mm | PLC 3 | -- | UL 746 | |
| 3.0 mm | PLC 1 | -- | UL 746 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.40 mm | V-0 | -- | UL 94 | |
| 0.75 mm | V-0 | -- | UL 94 | |
| 1.5 mm | V-0 | -- | UL 94 | |
| 3.0 mm | V-0 | -- | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 0.40 mm | 960 | -- | °C | IEC 60695-2-12 |
| 0.75 mm | 960 | -- | °C | IEC 60695-2-12 |
| 1.5 mm | 960 | -- | °C | IEC 60695-2-12 |
| 3.0 mm | 960 | -- | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 0.40 mm | 960 | -- | °C | IEC 60695-2-13 |
| 0.75 mm | 960 | -- | °C | IEC 60695-2-13 |
| 1.5 mm | 800 | -- | °C | IEC 60695-2-13 |
| 3.0 mm | 775 | -- | °C | IEC 60695-2-13 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Regrind | 50 | % | |
| Rear Temperature | 260 - 290 | °C | |
| Middle Temperature | 260 - 290 | °C | |
| Front Temperature | 260 - 290 | °C | |
| Nozzle Temperature | 260 - 290 | °C | |
| Processing (Melt) Temp | 270 - 285 | °C | |
| Mold Temperature | 65 - 95 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 700 TFE 15 | RTP Company | HDPE | RTP |
| Spartech Polycom SC1-6012 | Spartech Polycom | ABS | Spartech |
| EnCom PA/PPE2030GF BK43001 | EnCom, Inc. | Nylon+PPE | EnCom |
| Latiohm 87/28-05 PD01 G/10 | LATI S.p.A. | PC | Latiohm |
| CP PRYME® Nylon 6 N300HSL | Chase Plastics Services Inc. | Nylon 6 | CP PRYME® Nylon 6 |
