Order Products : sales@su-jiao.com
FRAGOM LC/125 RR
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NxPshG_FRAGOM-LC-125-RR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM : is the trade-mark of our flame retardant and halogen free polyolefin compounds. FRAGOM LC/125 RR : is our compound CROSSLINKABLE BY RADIATION halogen free, low smoke and flame retardant. It is suitable for automotive cables insulation with size >1 mm2 and for insulation of low tension cables. Exercise tetempearture - 40 / + 1425°C Certify : SAE J1127/1128,FIAT 7,Z8220,9.91107 T3-T3 Special |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 42 - 48 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | > 12.5 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 130 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 27 | % | ASTM D2863 |
| Halogen Content | 0 | % | IEC 60754-1 |
| Corrosive gases in flue gas- pH | > 4.50 | IEC 60754-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 150 - 160 | °C |
| Additional Information |
|---|
| No detrimental effects on properties and capability of FRAGOM in presence of convenient Masterbatch colours, black included.We suggest to dry masterbatch before using. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 - 80.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 80.0 - 110 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 140 | °C | |
| Cylinder Zone 4 Temp. | 150 | °C | |
| Die Temperature | 150 - 160 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FPP 30 T WLB | A. Schulman Europe | PP Homopolymer | POLYFORT® |
| Shandong Aobang TPU-Polyester 80-A | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Polyester | Shandong Aobang TPU-Polyester |
| Siloxane Masterbatch MB50-007 | Multibase, A Dow Corning Company | Siloxane, UHMW | Siloxane Masterbatch |
| EMPILON® 639A | EMPILON | SEBS | EMPILON® |
| ULTEM™ 1100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
