Order Products : sales@su-jiao.com

Formolene® 6520N

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Formosa Plastics Corporation, U.S.A.
Trademark:	Formolene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NvrWdS_Formolene-6520N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Formolene® 6520N is a medium impact copolymer of polypropylene characterized by its easy mold flow, physical property balance and excellent dimensional stability. The improved stiffness and impact balance also provides for utility in industrial applications including bins and crates, and small appliances. Formolene® 6520N meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content.

Message

Formolene® 6520N is a medium impact copolymer of polypropylene characterized by its easy mold flow, physical property balance and excellent dimensional stability.

The improved stiffness and impact balance also provides for utility in industrial applications including bins and crates, and small appliances.

Formolene® 6520N meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.

This material is free of animal-derived content.

General Information
Features	Good Dimensional Stability Good Impact Resistance Good Mold Release Good Stiffness No Animal Derived Components
Uses	Appliances Industrial Applications
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Injection Molded)	26.0	MPa	ASTM D638
Tensile Elongation ²(Yield, Injection Molded)	7.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(Injection Molded)	1240	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, Injection Molded)	130	J/m	ASTM D256

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Tarnamid® T-27 MSK	Grupa Azoty S.A.	Nylon 6	Tarnamid®
Nypol® PA A3 G30 CNZ0342 NR433	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
Bapolene® PP5010	Bamberger Polymers, Inc.	PP Copolymer	Bapolene®
Gravi-Tech™ GT6200-5002 X4 Black	PolyOne Corporation	Nylon 12	Gravi-Tech™
TECHNYL® A 218C V10 NATURAL S	Solvay Engineering Plastics	Nylon 66	TECHNYL®