Order Products : sales@su-jiao.com

NuSil MED4-4420

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NvpDnU_NuSil-MED4-4420.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: LOW VISCOSITY

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: LOW VISCOSITY

General Information
Features	Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Viscosity
-- ¹	18	Pa·s
-- ²	23	Pa·s
Curing Time (150°C)	0.25	hr
Pot Life (25°C)	25	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	17
Tensile Strength	4.45	MPa
Tensile Elongation at Break	570	%
Tear Strength	6.13	kN/m

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
MARPOL® Homo 36.0	Marco Polo International, Inc.	PP Homopolymer	MARPOL® Homo
Terprene™ 4100E	Mitsui Chemicals, Inc.	EPDM	Terprene™
DIOSHY® LP-855	DIOSHY Co.,Ltd.	SEBS+SBS	DIOSHY®
Gallonprene® GP640-7001	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
LEXAN™ LUX9610 resin	SABIC Innovative Plastics Asia Pacific	PC	LEXAN™