Glastic® 1410 Datasheet,Polyester, TS,Bulk Molding Compounds, Inc.-SHANGHAI SUSHENG

Message
Grade 1410 is a high-strength electrical grade material with excellent flammability resistance. In most applications, this material is competitive with SMC. Equal performance at a lower cost. Normally compression molded, but has been successfully injection molded in a number of applications.

General Information
Filler / Reinforcement	Glass fiber reinforced material
Features	High strength Insulation Good electrical performance Flame retardancy
Uses	Electrical/Electronic Applications Electronic insulation
Appearance	White Black Red Available colors brownish yellow
Forms	BMC-Block Molding Compound
Processing Method	Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.86	g/cm³	ASTM D792
Water Absorption (24 hr)	0.19	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Compression Molded)	13800	MPa	ASTM D638
Tensile Strength (Yield, Compression Molded)	33.2	MPa	ASTM D638
Flexural Modulus (Compression Molded)	16500	MPa	ASTM D790
Flexural Strength (Compression Molded)	192	MPa	ASTM D790
Compressive Strength	146	MPa	ASTM D695
Shear Strength	82.6	MPa	ASTM D732

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	800	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded)	260	°C	ASTM D648
RTI Elec	54.4	°C	UL 746
RTI	54.4	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	7.9E+14	ohms	ASTM D257
Dielectric Strength ¹	19	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	7.50 6.90		ASTM D150
1 MHz	5.10 5.20		ASTM D150
Dissipation Factor			ASTM D150
60 Hz	0.055 0.031		ASTM D150
1 MHz	0.19 0.20		ASTM D150
Arc Resistance	185	sec	ASTM D495

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94

Additional Information
Permittivity, ASTM D150, 60 Hz, Condition A: 6.9Permittivity, ASTM D150, 60 Hz, Condition D: 7.5Permittivity, ASTM D150, 1 MHz, Condition A: 5.1Permittivity, ASTM D150, 1 MHz, Condition D: 5.1Insulation Resistance, ASTM D257, Condition A: 78.5 Ohm x 10e13Insulation Resistance, ASTM D257, Condition C: 2.8 Ohm x 10e13Track Resistance, ASTM D2303: 285 minutesDissipation Factor, ASTM D150, 60 Hz, Condition A: 0.031Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.055Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.187Dissipation Factor, ASTM D150, 1 MHz, Condition D: 0.195

Additional Information

Permittivity, ASTM D150, 60 Hz, Condition A: 6.9Permittivity, ASTM D150, 60 Hz, Condition D: 7.5Permittivity, ASTM D150, 1 MHz, Condition A: 5.1Permittivity, ASTM D150, 1 MHz, Condition D: 5.1Insulation Resistance, ASTM D257, Condition A: 78.5 Ohm x 10e13Insulation Resistance, ASTM D257, Condition C: 2.8 Ohm x 10e13Track Resistance, ASTM D2303: 285 minutesDissipation Factor, ASTM D150, 60 Hz, Condition A: 0.031Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.055Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.187Dissipation Factor, ASTM D150, 1 MHz, Condition D: 0.195

Note Message
1 .	Method A (short time)

Category:	Polyester, TS , Thermoset Polyester
Manufacturer:	Bulk Molding Compounds, Inc.
Trademark:	Glastic®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NvHm6g_Glastic-1410.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SureSpec LLSC6-007	Genesis Polymers	LLDPE	SureSpec
Braskem PP H 216	Braskem	PP Homopolymer	Braskem PP
DISTRUMID 66GF30HS	Distrupol	Nylon 66	DISTRUMID
FLEXITEQ™ F65A100	Marplex Australia Pty. Ltd.	TPV	FLEXITEQ™
POLYCOMPO PE 2100JH	POLYCOMPO Co.,Ltd.	HDPE	POLYCOMPO PE