Order Products : sales@su-jiao.com
Bormed™ LE6609-PH
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NvCEw9_Bormed-LE6609-PH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed LE6609-PH is a low density polyethylene produced in a high-pressure process. It is intended for blow moulding of soft and flexible packages for pharmaceutical products. The product can also be used for injection moulding and film blowing. Products made from Bormed LE6609-PH can be sterilised by using ethylene oxide, gamma radiation, electron beam radiation or steam. Sterilisation steam temperature can be above 110 °C. Applications : Packaging for pharmaceutical products "blow-fill and seal" Ampoules and Bottles |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.30 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 53 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 350 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 14.0 | MPa | ISO 527-2/50 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 54.0 | °C | ISO 75-2/B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 165 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PC-GP1-(color)-LF | Polymer Resources Ltd. | PC | PRL |
| Sylvin 8815-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Akulon® Ultraflow K-FG6-FC NA99001 | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
| Desmovit® DP R 3918 | geba Kunststoffcompounds GmbH | TPU-Ester/Ether | Desmovit® |
| Huafon HF-1170AP | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
