Order Products : sales@su-jiao.com

SUMIPLOY® MS5620

Category:	PESU , Polyethersulfone
Manufacturer:	Sumitomo Chemical Co., Ltd.
Trademark:	SUMIPLOY®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Numwbw_SUMIPLOY-MS5620.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SUMIPLOY® MS5620 is a Polyethersulfone (PESU) material. It is available in Asia Pacific or North America for injection molding.

Important attributes of SUMIPLOY® MS5620 are:

Chemical Resistant

Creep Resistant

Flame Retardant

Good Dimensional Stability

Heat Resistant

General Information
Features	Flame Retardant Gasoline Resistance Good Chemical Resistance Good Creep Resistance Good Dimensional Stability Good Impact Resistance High ESCR (Stress Crack Resist.) High Heat Resistance Oil Resistant Platable
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.73	g/cm³	ASTM D792
Molding Shrinkage			ASTM D955
Flow	0.32	%
Across Flow	0.41	%
Water Absorption (24 hr)	0.36	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	90.0	MPa	ASTM D638
Tensile Elongation (Break)	4.8	%	ASTM D638
Flexural Modulus	6600	MPa	ASTM D790
Flexural Strength	115	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (6.40 mm)	29	J/m	ASTM D256
Unnotched Izod Impact (6.40 mm)	270	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	210	°C	ASTM D648
CLTE			ASTM D696
Flow : -50 to 150°C	2.4E-5	cm/cm/°C
Transverse : 50 to 150°C	3.2E-5	cm/cm/°C

Injection	Nominal Value	Unit
Processing (Melt) Temp	360	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 200 H TFE 20	RTP Company	Nylon 66	RTP
RTP 2184 TFE 15	RTP Company	PEI	RTP
RTP 300 MG 30	RTP Company	PC	RTP
ESTACARB PC 2020 GF V0	Cossa Polimeri S.r.l.	PC	ESTACARB
ISPLEN® PM 366 AV	REPSOL	PP Copolymer	ISPLEN®