Order Products : sales@su-jiao.com
Andur 1-83 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NtTp03_Andur-1-83-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 1-83 AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 83-85 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 1-83 AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1800 | cP | ASTM D2393 |
| 100°C | 640 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3 to 3.4%Viscosity, 70°F: Wax cpsSpecific Gravity, ASTM D792, 70°F: 1.05 g/mlSpecific Gravity, ASTM D792, 212°F: 0.997 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miflon® 3212 | Jiangsu Meilan Chemical Co., Ltd. | PTFE | Miflon® |
| Silopren® LSR 2610 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| SLOVAMID® 66 GF 15 T 6 TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| TAISOX 6334F | Formosa Plastics Corporation | LDPE | TAISOX |
| OmniLon™ PA6/6 MS2 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
