Order Products : sales@su-jiao.com
Hanwha Total PE R901P
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Nt3bKA_Hanwha-Total-PE-R901P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| R901P is a linear low-density polyethylene resin for rotational molding applications. This grade is available in powder form. This grade is designed to be processed in conventional rotational molding equipment. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 16.7 | MPa | |
| Break | 20.6 | MPa | |
| Tensile Elongation (Break) | 1200 | % | ASTM D638 |
| Apparent Bending Modulus | 710 | MPa | ASTM D747 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 490 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 113 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC 6914 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Sindustris POM N110LDS | Sincerity Australia Pty Ltd. | Acetal (POM) Homopolymer | Sindustris POM |
| UNITIKA Nylon 6 A1022GFL15 | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| Epoxies, Ect. 60-7158 | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| Kingfa PA66-R0N | Kingfa | Nylon 66 | Kingfa |
