Ajedium™ Films -- Polyetherimide Datasheet,PEI,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Films of Polyetherimide (PEI) are amorphous and suitable for high termperature applications. Additionally, they have an excellent combination of thermal, mechanical and electrical properties, along with very low flammability and low levels of smoke evolution during combustion. These features make PEI especially well suited for electrical and electronic insulators. Additionally, applications in a variety of structural components requiring high strength and rigidity at elevated temperatures have used PEI films. Polyetherimide resists a wide range of chemicals and has good resistance to UV and gamma radiation. Its glass transition temperature allows for use at high temperatures while maintaining the high mechanical properties. Electrical properties show very good stability under variable temperatures, humidity and frequency conditions. Moreover, PEI films exhibit a low dissipation factor even at very low frequencies.

General Information
Features	Good dimensional stability Low smoke Good electrical performance Good chemical resistance Heat resistance, high Flame retardancy
Uses	Electrical/Electronic Applications Airplane trim Industrial application Application in Automobile Field Oil/Gas Supplies
RoHS Compliance	RoHS compliance
Appearance	Amber

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.27	g/cm³	ASTM D792
Water Absorption (24 hr)	0.20	%	ASTM D570

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	30	µm
secant modulus			ASTM D882
MD	2850	MPa	ASTM D882
TD	2690	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	103	MPa	ASTM D882
TD : Yield	107	MPa	ASTM D882
MD : Fracture	114	MPa	ASTM D882
TD : Fracture	128	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Yield	7.0	%	ASTM D882
TD : Yield	7.0	%	ASTM D882
MD : Fracture	99	%	ASTM D882
TD : Fracture	140	%	ASTM D882
Dart Drop Impact	< 80	g	ASTM D1709
Area coefficient	152	ft²/lb/mil

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	217	°C	ASTM D3418
Thermal Conductivity	0.12	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+17	ohms·cm	ASTM D257
Dielectric Strength (0.0300 mm)	33	kV/mm	ASTM D149
Dielectric Constant (1 kHz)	3.15		ASTM D150
Dissipation Factor (1 kHz)	1.0E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	47	%	ASTM D2863

Additional Information
Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PEI film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Additional Information

Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PEI film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Category:	PEI , Polyether Imide
Manufacturer:	Solvay Specialty Polymers
Trademark:	Ajedium™ Films
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Nq2kCh_Ajedium-Films----Polyetherimide.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Moplen RP2795	LyondellBasell Industries	PP Random Copolymer	Moplen
APEX® 76-5066-M	Teknor Apex Company	PVC, Flexible	APEX®
Flexane® Fast Cure Rubber Repair Putty	Devcon	PUR, Unspecified	Flexane®
Kingfa MAC-601 UV	Kingfa	PC+ABS	Kingfa
Mitsui EPT™ 3072EM	Mitsui Chemicals, Inc.	EPDM	Mitsui EPT™