Order Products : sales@su-jiao.com
Generic Nylon 6 - Glass Fabric
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NnpAOO_Generic-Nylon-6---Glass-Fabric.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 6 - Glass Fabric This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.24 - 1.36 | g/cm³ | ASTM D792 |
| 23°C | 1.22 - 1.63 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 0.29 - 0.60 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation | |||
| Fracture, 23°C | 2.0 - 5.0 | % | ASTM D638 |
| Fracture, 23°C | 2.6 - 7.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4140 - 13000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 5.0 - 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, not annealed | 200 - 210 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 195 - 220 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 - 90.1 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Mold Temperature | 70.0 - 92.5 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 6 - Glass FabricThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMILITE® PL-1780 | Sumitomo Bakelite Co., Ltd. | Phenolic | SUMILITE® |
| Hapcast™ 3736 | Hapco Inc. | TP, Unspecified | Hapcast™ |
| Kemcor LD 4200 (INJECTION) | Qenos Pty Ltd | LDPE | Kemcor |
| Panlite® BN-8120R | TEIJIN LIMITED | PC | Panlite® |
| POLYform C M90 UV | Polykemi AB | Acetal (POM) Copolymer | POLYform C |
