Order Products : sales@su-jiao.com
RTP 2800 B-85A HF UV
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NmwM4q_RTP-2800-B-85A-HF-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Flow - UV Stabilized |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Moisture Content | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 10 sec | 88 | ||
| Shore D | 35 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 5.17 | MPa | ASTM D412 |
| Tensile Strength 2(Yield, 3.20 mm) | 7.58 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 450 | % | ASTM D412 |
| Tear Strength 4 | 36.8 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 182 to 210 | °C | |
| Mold Temperature | 15.6 to 65.6 | °C |
| Note Message | |
|---|---|
| 1 . | Die C, 510 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® 4538A | Chevron Phillips Chemical Company LLC | LDPE | Marlex® |
| THERMOLAST® K TC6UVZ (Series: UV/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Toyolac® AX05 X03 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| NYLOY® MG-0023N | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| Celanex® 5300-2 | Celanese Corporation | PBT | Celanex® |
