Order Products : sales@su-jiao.com
ColorFast® PAHF
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | LTL Color Compounders, Inc. |
| Trademark: | ColorFast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NkQxWk_ColorFast-PAHF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General purpose HB-rated PC/ABS with improved chemical resistance |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 19 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 57.2 | MPa | |
| Break | 50.3 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 5.0 | % | |
| Break | 100 | % | |
| Flexural Modulus 3 | 2340 | MPa | ASTM D790 |
| Flexural Strength 4 | 88.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 104 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 to 110 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Suggested Shot Size | 30 to 80 | % | |
| Rear Temperature | 249 to 288 | °C | |
| Middle Temperature | 254 to 293 | °C | |
| Front Temperature | 260 to 302 | °C | |
| Nozzle Temperature | 274 to 302 | °C | |
| Processing (Melt) Temp | 274 to 302 | °C | |
| Mold Temperature | 60.0 to 87.8 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Vent Depth | 0.038 to 0.076 | mm |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VECTOR® 4215 | Dexco Polymers LP | SIS+SI | VECTOR® |
| Alathon® L5040TC | LyondellBasell Industries | HDPE | Alathon® |
| Ketron® PEEK-1000 | Quadrant Engineering Plastic Products | PEEK | Ketron® |
| Karina COMP. PVC YELLOW. -E 600-DA-02/381-A-IS | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Paracril® CV | INSA | NBR | Paracril® |
