Order Products : sales@su-jiao.com
EVALENE® HDPE HP10441
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Nhxgdw_EVALENE-HDPE-HP10441.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDPE is used to make large drums, bleach bottles, shopping bags, crates nets and pails. Tough. Rigid. Heavy Duty. With High Chemical Resistance. These qualities make Evalene® HDPE suitable for a diverse line of industrial products. Blown Film: Shopping and grocery bags Pipes: Pressure and non-pressure pipes Blow Molding: Bottles for household and industrial chemicals, large drums Injection Molding: Pallets, crates, cases, trays, toys, houseware, caps |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.944 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg 1 | 0.080 | g/10 min | |
| 190°C/21.6 kg | 10 | g/10 min | |
| Environmental Stress-Cracking Resistance (F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2(Compression Molded) | 700 | MPa | ASTM D638 |
| Tensile Strength 3 | ASTM D638 | ||
| Yield, Compression Molded | 24.0 | MPa | |
| Break, Compression Molded | 30.0 | MPa | |
| Tensile Elongation 4(Break, Compression Molded) | > 600 | % | ASTM D638 |
| Note Message | |
|---|---|
| 1 . | Product is controlled by Flow Index. melt Index is estimated for customer use. |
| 2 . | Type IV, 5.0 mm/min |
| 3 . | Type IV, 50 mm/min |
| 4 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoFlo 70A-300 | KMI Group Inc. | SEBS | PrimoFlo |
| TARFLON™ NEO RC1760 | Idemitsu Kosan Co., Ltd. | PC | TARFLON™ |
| 4LEX® 25F13300 UV | 4Plas | PC | 4LEX® |
| Calsak ABS CS-72L | Calsak Polymers | ABS | Calsak ABS |
| INEOS HDPE T50-2000-119 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
